Emergency Push Bar Repair & Installation Services
Do You Need a Push Bar / Panic Bar Installed in Chandler, AZ or surrounding areas?
Push bars are useful for improving the safety of your business, as well as ensuring that your customers are completely satisfied. It is very important to make sure that your push bar is working correctly for many safety reasons.
The best way to confirm that your push bar is installed correctly is to call a professional locksmith to come out. Diamondback Lock and Key will send out an experienced locksmith, that has the knowledge to install every push bar properly. If not installed perfectly it can cause the door to malfunction and possibly even fail to open at all.
Our fully trained knowledgeable locksmiths will install your push bar whenever it is convenient for you and we offer a 100% satisfaction warranty on all of our work. To make certain you are satisfied, we only use high-quality parts and components.
We Repair and Service Emergency Exit Devices
Are you having trouble with a push bar for an emergency exit in your place of business? If this is occurring you might also have to worry about safety issues that could occur due to this problem. Another possibility is that the malfunctioning of the device could cause the alarm to go off, creating a disruption for your customers.
Our team is capable of providing service on all emergency exits throughout the Phoenix metro area. We will repair the problem or replace your push bar, whichever one is needed our technician will make the assessment and let you know right away.
Repair or Replace Your Commercial Push Bar In Chandler and Valleywide
Push bars are a great convenience and security feature for your business. Unfortunately, even the best push bars can break down over time due to use, so before you decide to replace your push bar, give us a call at Diamondback Lock and Key.
Our technicians can repair or replace damaged push bars, but before replacing it we will come out and do a full inspection of the existing push bar to assess the damage. If there is a possibility that replacing the entire part is not needed, we will just do the repair and save you some money on the expenses.
We pride ourselves on only using the highest-quality tools and equipment, which guarantees we are installing the part correctly. The push bar that will be installed will last years and withstand a lot of abuse from your customers.
Diamondback Lock and Key is the top Locksmith company in the Chandler and Phoenix Metro Area. We will come to your location whenever it is convenient for you, and if needed, we can even provide emergency service.
Please call Diamondback Lock and Key today at 602-388-1201 to Schedule your Push Bar Installation or Repair
|
|
|
|
Popular Brands We Service:
- Adams Rite,
- Alarm Lock,
- Arrow,
- Best Access Systems,
- Corbin Russwin,
- Detex,
- Don Jo,
- Dorma,
- Falcon,
- Glynn Johnson,
- HES,
- Hpc Kekabs,
- IEI,
- Ives,
- Kaba Access Control,
- Keysyre,
- LCN,
- Medeco Security Locks,
- Norton,
- Precision Hardware,
- Qualified,
- Rixson,
- Roton,
- Sargent,
- Schlage,
- Securitron,
- SOSS,
- Von Duprin,
- Yale
Frequently Asked Questions About Push Bar Installation
Q: How Much Does a Push Bar Installation Cost?
A: The cost of push bar installation can vary depending on the type of push bar, the complexity of the installation, and the specific requirements of your property. On average, installation costs can range from $200 to $600. For an accurate quote, it’s best to contact Diamondback Lock and Key for a free estimate.
Q: How Often Should I Get an Exit Device Replaced?
A: Exit devices, including push bars, should be inspected regularly to ensure they are functioning correctly. While the lifespan of these devices can vary, it’s recommended to consider replacement every 7 to 10 years, or sooner if there are signs of wear or failure. Regular maintenance can extend the life of your push bar.
Q: What Are the Signs That You Need a Push Bar Replacement?
A: Some common signs that your push bar may need to be replaced include difficulty in opening the door, a loose or damaged push bar, unusual noises during operation, and visible signs of rust or corrosion. If you experience any of these issues, it’s advisable to consult a professional locksmith.
Q: What Is a Rim Exit Device?
A: A rim exit device is a type of exit device that is mounted on the surface of the door. It features a horizontal bar that, when pushed, retracts the latch to allow the door to open. Rim exit devices are commonly used in commercial buildings for their ease of installation and reliability.
Q: What Is a Request to Exit Device?
A: A request to exit (REX) device is typically used in electronic access control systems. It allows authorized exit from a secure area and can be integrated with push bars. These devices are often used in high-security settings where controlled access is required.
Q: How Do You Lock a Push Bar Door?
A: Locking a push bar door typically involves using the associated locking mechanism, which could be a keyed lock or an electronic access control system. If the door is equipped with a keyed cylinder, insert the key and turn it to lock the door. For electronic systems, the door may lock automatically when closed.
Q: How Can You Keep a Push Bar Door Unlocked?
A: To keep a push bar door unlocked, you may need to engage the “dogging” feature, which holds the push bar in a retracted position, allowing the door to remain unlocked. This is usually done by inserting a key or hex wrench into a small hole near the push bar and turning it.
Q: How Do You Lock a Push Bar Door Without a Key?
A: If the push bar door is equipped with an electronic locking mechanism, it may lock automatically when the door is closed. For mechanical systems without a key, the door will generally remain unlocked unless manually locked using a separate locking mechanism. Always check with your locksmith for specific instructions based on your door hardware.
